On-site vs off-site construction

Improved suction power.. As a filter starts to become more clogged with dirt, it stops air from flowing freely through the vacuum cleaner.

When hair becomes tangled around the brush bar, it can prevent the bristles from digging into carpet fibres.This reduces performance and makes your Vax less effective on carpets.. For this reason, it’s important to regularly remove caught fibres using the method outlined above.

Here’s a quick recap:.Always make sure the vacuum is switched off before performing any maintenance..Remove the floorhead from the vacuum.. Use a coin to unlock the brush bar and slide it out of the floorhead.. Run scissors along the groove in the brush bar and cut away tangled hair.. Use a dry cloth to wipe the inside of the floorhead.

Check for any blockages at the outlet.. Slide the brush bar back into position and return the end cap to a locked position.. We hope this article has helped you to remove hair from your Vax Blade’s brush bar.If you have any questions, please let us know in the comments section below.

You may also want to read our guide to.

cleaning the Vax Blade 4’s filterWhere are Vax vacuum cleaners made?Here are some of the most common causes of a non-rotating brush bar and how to fix them..

Always switch off and unplug your vac before performing maintenance on the brush bar.If the vacuum is plugged in, there’s a chance the brush could start spinning when you fix the issue.

This could cause serious injury to your hand, and even risk an electric shock.. 1.Check for Tangles and Blockages.